Installation dimension and description of 2BV water ring vacuum pump

Today we are going to introduce to you a very well-known and common 2BV water ring vacuum pump. I don't know how much you know about this. Today, we have prepared the following installation instructions and installation dimensions of 2BV water ring vacuum pump. I hope people from all walks of life can take the time to come and have a look.

2BV water ring vacuum pump and compressor system is composed of vacuum pump (compressor), motor and gas-water separator pipeline.

The working process of the vacuum pump, compressor and gas-water separator is as follows: the gas enters 2BV vacuum pump or compressor through the pipeline, then enters the gas-water separator through the exhaust pipe, and is discharged through the exhaust pipe of the gas-water separator. When used as a compressor, the gas-water mixture discharged by the compressor is separated in the gas-water separator, and the gas is delivered to the system requiring compressed gas through the valve. The working water in the 2BV water ring vacuum pump or compressor is discharged to the vacuum pump for reuse by the air-water separator without cooling, and the rest of the working water is supplemented by the water supply pipe. The size of the water supply is adjusted by the valve on the water supply pipe.

The difference between gas suction and pressure delivery system is only that the internal structure of gas water separator is different. When pumping gas, the pressure at the suction port is lower than the atmospheric pressure, while the pressure at the exhaust port is equal to the atmospheric pressure, and the gas water separator has overflow pipe; when pressing gas, the suction port is under atmospheric pressure (or vacuum state), and the pressure at the exhaust port is higher than one atmospheric pressure. To ensure the gas pressure, the water level of the gas water separator is controlled by the overflow switch.

Water ring vacuum pump

Rotary Vane Vacuum Pump

Molecular Pump Application